Points to Consider During Installation
The hot water or steam temperature in aluminum radiators maximum 200°C must be.
The following measurements must be observed during radiator installations:
From the door: 12 cm
From the back wall: 3-5 cm
From the shelf above: 10-15 cm below
If the back wall is not sufficiently insulated, additional insulation should be provided to reduce heat loss.
Points to Consider When Using Aluminum Radiators
To clean radiator surfaces absolutely do not use chemical substances.
Do not isolate the radiator from the system by closing the inlet and outlet valves.
The aluminum radiator with copper fittings direct contact causes electrochemical corrosion causes. Therefore, such connections should be avoided.
Each radiator must definitely have an air vent (bleeding valve) must be installed.
The water in the closed circuit its pH value should be between 7 and 8 must be.
English 
Turkish 
Kazakh